RGB分析儀
Feasa RGB LED分析儀是設計用于測量RGB LED，RGB LED
光通過蝕刻或油漆時的背光開關和面板
塑料鑲板；比如在汽車儀表板上。
該分析儀測試了強度、同質(zhì)性、xy色度、主導波長
和CCT的準確、可靠、快速。
RGB LED分析儀可在6和10通道配置。
6個通道單元的尺寸為105x55x50mm；10通道型號為
145x55x50mm.每個通道光纖的長度為0.6m，光纖的直徑為2.2mm，
包括包層，彎曲半徑為50 mm。從最低限度開始操作
亮度為0.5cd/m2，最大亮度為1000 cd/m2，溫度范圍為0-50°C。
對于單色和RGB顏色，精確到±0.01@ x=0.33，y=0.33，可重復性為±0.002和<，強度的1%?？捎玫慕涌冢?USB，串行，和雛菊鏈。
軟件：提供設置軟件；示例命令行接口C、C++；DLL、Labview支持。
型號：3RGB、5RGB、6RGB、10RGB
RGB Analyser
The Feasa RGB LED Analyser was designed for measuring RGB LEDs, RGB LED
backlit switches and panels where the light is travelling through etched or painted
plastic panelling; such as on car dashboards.
This analyser tests for intensity, homogeneity, xy Chromaticity, Dominant Wavelength
and CCT accurately, reliably and quickly.
The RGB LED Analyser is available in 6 and 10 channel configurations.
The dimensions of the 6 channel units is 105x55x50mm; the 10 channel model is
145x55x50mm. Each channel fiber has a length of 0.6m, the fiber has a diameter of 2.2mm,
including cladding, and a bend radius of 50 mm. Operating from a minimum
luminance of 0.5cd/m2 and a maximum luminance of 1000 cd/m2 and temperature range of 0-50°C.
Accurate to ±0.01@ x=0.33, y=0.33 for monochromatic and RGB colours, with repeatability of ±0.002 and <1% of intensity.
Available Interfaces: USB, Serial, and Daisy Chain.
Software: Set up so??ware provided; Sample command line interface C, C++; DLL, Labview support.
Models:
3-RGB, 5- RGB, 6-RGB, 10-RGB
